[Latest Version] Free NSE7_SDW-6.4 PDF Download with 100% Pass Guarantee

[Latest Version] Free NSE7_SDW-6.4 PDF Download with 100% Pass Guarantee

Attention please! Here is the shortcut to pass your Newest NSE7_SDW-6.4 vce dumps exam! Get yourself well prepared for the NSE 7 Network Security Architect Apr 12,2022 Hotest NSE7_SDW-6.4 free download Fortinet NSE 7 – SD-WAN 6.4 exam is really a hard job. But don’t worry! We We, provides the most update NSE7_SDW-6.4 vce. With We latest latest NSE7_SDW-6.4 dumps, you’ll pass the NSE 7 Network Security Architect Latest NSE7_SDW-6.4 pdf dumps Fortinet NSE 7 – SD-WAN 6.4 exam in an easy way

We Geekcert has our own expert team. They selected and published the latest NSE7_SDW-6.4 preparation materials from Official Exam-Center.

The following are the NSE7_SDW-6.4 free dumps. Go through and check the validity and accuracy of our NSE7_SDW-6.4 dumps.If you need to check sample questions of the NSE7_SDW-6.4 free dumps, go through the Q and As from NSE7_SDW-6.4 dumps below.

Question 1:

Refer to the exhibit.

Multiple IPsec VPNs are formed between two hub-and-spokes groups, and site-to-site between Hub 1 and Hub 2. The administrator configured ADVPN on the dual regions topology.

Which two statements are correct if a user in Toronto sends traffic to London? (Choose two.)

A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.

B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.

C. London generates an IKE information message that contains the Toronto public IP address.

D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.

Correct Answer: AD

Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/320160/example-advpnconfiguration

Question 2:

Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?

A. The 10 Mbps bandwidth is shared equally among the IP addresses.

B. Each IP is guaranteed a minimum 10 Mbps of bandwidth.

C. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.

D. A single user uses the allocated bandwidth divided by total number of users.

Correct Answer: C



Question 3:

Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?

A. diagnose sys virtual-wan-link health-check

B. diagnose sys virtual-wan-link log

C. diagnose sys virtual-wan-link sla-log

D. diagnose sys virtual-wan-link intf-sla-log

Correct Answer: C

Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging

Question 4:

Which diagnostic command can you use to show the SD-WAN rules interface information and state?

A. diagnose sys virtual-wan-link route-tag-list.

B. diagnose sys virtual-wan-link service.

C. diagnose sys virtual-wan-link member.

D. diagnose sys virtual-wan-link neighbor.

Correct Answer: C

Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/818746/sd-wan-related-diagnosecommands

Question 5:

Refer to exhibits.

Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output. Based on the exhibits, which statement is correct?

A. Port1 became dead because no traffic was offload through the egress of port1.

B. SD-WAN member interfaces are affected by the SLA state of the inactive interface.

C. Both SD-WAN member interfaces have used separate SLA targets.

D. The SLA state of port1 is dead after five unanswered requests by the SLA servers.

Correct Answer: D

Question 6:

Which two reasons make forward error correction (FEC) ideal to enable in a phase one VPN interface?

(Choose two.)

A. FEC is useful to increase speed at which traffic is routed through IPsec tunnels.

B. FEC transmits the original payload in full to recover the error in transmission.

C. FEC transmits additional packets as redundant data to the remote device.

D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links.

E. FEC reduces the stress on the remote device jitter buffer to reconstruct packet loss.

Correct Answer: CD

Question 7:

Refer to exhibits.

Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate.

Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two.)

A. All the existing sessions that do not use SNAT will be flushed and routed through port1.

B. All the existing sessions will continue to use port2, and new sessions will use port1.

C. All the existing sessions using SNAT will be flushed and routed through port1.

D. All the existing sessions will be blocked from using port1 and port2.

Correct Answer: BC

Question 8:

Which components make up the secure SD-WAN solution?

A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy

B. Application, antivirus, and URL, and SSL inspection

C. Datacenter, branch offices, and public cloud

D. Telephone, ISDN, and telecom network

Correct Answer: A

Question 9:

Refer to the exhibit.

Which two statements about the status of the VPN tunnel are true? (Choose two.)

A. There are separate virtual interfaces for each dial-up client.

B. VPN static routes are prevented from populating the FortiGate routing table.

C. FortiGate created a single IPsec virtual interface that is shared by all clients.

D. is one of the remote IP address that comes through index interface 1.

Correct Answer: CD

Question 10:

Refer to exhibits.

Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.

Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)

A. The implicit rule overrides all other rules because parameters widely cover sources and destinations.

B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.

C. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.

D. The initial session of an application goes through a learning phase in order to apply the correct rule.

Correct Answer: AB

Question 11:

What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two.)

A. Specify outgoing interface routing cost.

B. Configure SD-WAN rules interface preference.

C. Select SD-WAN balancing strategy.

D. Specify incoming interfaces in SD-WAN rules.

Correct Answer: AB

Question 12:

Refer to the exhibit.

Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?

A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.

B. Changes have been made on firewall policy ID 1 on FortiGate.

C. Firewall policy ID 1 has source NAT disabled.

D. FortiGate has terminated the session after a change on policy ID 1.

Correct Answer: B

Question 13:

What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)

A. The FortiGate cloud key has not been added to the FortiGate cloud portal.

B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager.

C. FortiGAte has obtained a configuration from the platform template in FortiGate cloud.

D. A factory reset performed on FortiGate.

E. The zero-touch provisioning process has completed internally, behind FortiGate.

Correct Answer: AE

Question 14:

Refer to the exhibit.

Based on output shown in the exhibit, which two commands can be used by SD-WAN rules? (Choose two.)

A. set cost 15.

B. set source

C. set priority 10.

D. set load-balance-mode source-ip-based.

Correct Answer: CD

Question 15:

Refer to the exhibit.

Which two statements about the debug output are correct? (Choose two.)

A. The debug output shows per-IP shaper values and real-time readings.

B. This traffic shaper drops traffic that exceeds the set limits.

C. Traffic being controlled by the traffic shaper is under 1 Kbps.

D. FortiGate provides statistics and reading based on historical traffic logs.

Correct Answer: AB

Leave a Reply

Your email address will not be published.