Browsed by
Tag: 117-201 exam dumps

[PDF and VCE] Free Geekcert home 117-201 VCE and PDF, Exam Materials Instant Download

[PDF and VCE] Free Geekcert home 117-201 VCE and PDF, Exam Materials Instant Download

Do not worry about your Recent Updates Hotest 117-201 exam questions exam preparation? Hand over your problems to Geekcert in change of the Recent Updates Hotest 117-201 free download Linux Advanced Administration certifications! Geekcert provides the latest home Recent Updates Hotest 117-201 pdf exam preparation materials with PDF and VCEs. We Geekcert guarantees you passing Recent Updates Jan 14,2022 Latest 117-201 study guide exam for sure.

association of certification 117-201 exam resources – Geekcert. Geekcert – home dumps, braindumps, certification 117-201 exam dumps. Geekcert 117-201 certification practice questions and answers. help candidates get well prepared for their 117-201 certification exams. pass the 117-201 exam on your first attempt with Geekcert!

We Geekcert has our own expert team. They selected and published the latest 117-201 preparation materials from home Official Exam-Center:

The following are the 117-201 free dumps. Go through and check the validity and accuracy of our 117-201 dumps.Real questions from 117-201 free dumps. Download demo of 117-201 dumps to check the validity.

Question 1:

A server has three disks of 80GB each and must manage a database with 4 million records of 30KB each. The best configuration for this server, with the criteria being performance, configurability and flexibility, is:

A. Use just LVM

B. Use RAID1 over LVM

C. Use LVM over RAID5

D. Use LVM over RAID1

E. Use RAID5 over LVM

Correct Answer: C

Question 2:

You decide to use the logical volume manager (LVM) to manage four 4GB disk drives. After creating the volume group, how would you create a 10GB logical volume called big-app?

A. vgcreate-p 10g-n/dev/vg01/big-app

B. vgcreate -l 2560 /dev/vg0 1/big-app

C. vg01/big-app mklvm -v 10240 -n /dev/

D. lvcreate -v 10240 /dev/ vg01/big-app

E. lvcreate -l 2560 vg01 -n big-app

Correct Answer: E

Question 3:

Which RAID level provides the most redundancy?





Correct Answer: C

Question 4:

Before compiling a new kernel, what needs to be done?

A. Compile kernel modules

B. Configurethekerneloptions

C. Delete old kernel sources

D. Change to runlevel 1

E. All of the above

Correct Answer: B

Question 5:

One of the IDE hard drives in a server is transferring data very slowly. What command must be run to enable DMA on it?

A. hdparm -d /dev/hda

B. hdparm –dma /dev/hda

C. hdparm –dma /dev/hdal

D. hdparm -d /dev/hdal

E. hdparm -dl /dev/hda

Correct Answer: E

Question 6:

What command is used to create an ISO9660 filesystem that can be properly accessed from a Windows 95/98 machine?

A. mkisofs -l -o backup.iso /home/joe

B. mkisofs -J -T -r -o backup.iso /home/joe

C. mkisofs -D -T -o backup.iso /home/joe

D. mkisofs -j -T -o backup.iso /home/joe

E. mkisofs -d -T -o backup.iso /home/joe

Correct Answer: B

Question 7:

To make a system backup, the simplest and fastest way is to use the tar command. Select the correct alternative below that shows the three tar parameters that create, list and expand a tar file respectively.

A. –create–list–extract

B. –compose –list –expand

C. -c -t -e

D. -c -l -x

Correct Answer: A

Question 8:

What is the command to add another IP address to an interface that already has (at least) one IP address?

A. ifconfig eth0:1

B. ifconfigeth0192.168.1.2

C. ipconfig eth0:1

D. ipconfig eth0

E. ifconfigeth0:sub1192.168.1.2

Correct Answer: AE

Question 9:

What needs to be done to enable 32 bit I/O transfer mode for (E)IDE disks, on a system running a 2.4 series Linux kernel?

A. The Linux kernel must be recompiled.

B. The sysctl utility must be used.

C. The hdparm utility must be used.

D. This feature isn\’t supported in 2.4 series kernels.

E. This feature is enabled by default in 2.4 series kernels

Correct Answer: C

Question 10:

The following is an excerpt from the output of tcpdump -nli ethl \’udp\’:

13:03:17.277327 IP > 43653 A? (25)

13:03:17.598624 IP > 43653 1/0/0 A (4l)

Which networkservice or protocol wasused?






Correct Answer: D

Question 11:

Considering the following kernel IP routing table now, which of the following commands must be remove the route to the network l0.l0.1.0/24? Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface UH 0 0 0 ppp0 U 0 0 0 eth0 U 0 0 0 eth1 UG 0 0 0 eth1 U 0 0 0 lo UG 0 0 0 ppp0

A. route del

B. route del

C. route del -net

D. route del gw

E. route del -net

Correct Answer: C

Question 12:

A DNS server has the IP address Which TWO of the following need to be done on a client machine to use thisDNSserver?

A. Add nameserver to /etc/resolv.conf

B. Run route add nameserver

C. Run ifconfig eth0 nameserver

D. Ensure that the dns service is listed in the hosts entry in the /etc/nsswitch.conf file

E. Run bind add nameserver

Correct Answer: AD

Question 13:

WhichofthesewayscanbeusedtoonlyallowaccesstoaDNSserverfrom specifiednetworks/hosts?

A. Using the limit{…;};statement in the named configuration file.

B. Using the allow-query{…;};statement in the named configuration file.

C. Using the answer only{…;};statement in the named configuration file.

D. Using the answer{…;};statement in the named configuration file.

E. Using the query access{…;};statement in the named configuration file.

Correct Answer: B

Question 14:

Which of these commands allows you to use shared libraries that are in /usr/local/lib?

A. export LD_PRELOAD=/usr/local/lib

B. exportLD_LIBRARY_PATH=/usr/local/lib

C. ldconfig /usr/local/lib

D. ldd /usr/local/lib

Correct Answer: C

Question 15:

After unpacking the source code for a Linux kernel, what is the first make command that should be run which will delete any current configuration and all generated files? This command will ensure that no inappropriate files were left in the kernel archive by the maintainer.

A. make depend

B. make distclean

C. make config

D. make clean

E. makemrproper

Correct Answer: B