Browsed by
Tag: JN0-663 new questions

Pass Guarantee JN0-663 Exam By Taking New JN0-663 VCE And PDF Braindumps

Pass Guarantee JN0-663 Exam By Taking New JN0-663 VCE And PDF Braindumps

Attention please! Here is the shortcut to pass your JN0-663 exam! Get yourself well prepared for the JNCIP-SP JN0-663 Service Provider Routing and Switching, Professional (JNCIP-SP) exam is really a hard job. But don’t worry! We We, provides the most update JN0-663 exam dumps. With We latest JN0-663 new questions, you’ll pass the JNCIP-SP JN0-663 Service Provider Routing and Switching, Professional (JNCIP-SP) exam in an easy way

Visit our site to get more JN0-663 Q and As:https://www.pass4true.com/jn0-663.html (96 QAs Dumps)
Question 1:

You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit. What are two reasons for this behavior? (Choose two.)

A. The LSA is a Type 4 LSA.

B. An OSPF export policy is being applied to the route.

C. An OSPF import policy is being applied to the route.

D. The LSA is a Type 5 LSA.

Correct Answer: BC


Question 2:

Referring to the exhibit, hosts in Site 1 and Site 2 are unable to communicate with each other through the Layer 3 VPN.

What is the problem?

A. The two sites are in the same AS.

B. The two sites are using the same instance type.

C. The two sites are using the same route target.

D. The two sites are using the same route distinguisher.

Correct Answer: A


Question 3:

Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)

A. The ABR advertises a default route to the NSSA using a Type 7 LSA.

B. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16.0/20 range.

C. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.

D. The ABR does not summarize any routes within the 192.168.16.0/20 range.

E. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.

Correct Answer: ABC


Question 4:

Referring to the exhibit, which two statements about route reflectors are correct? (Choose two.)

A. RR1 advertises routes learned from Client1 to RR2 with itself as the next hop.

B. RR2 advertises routes learned from Client3 to EBGP2 with itself as the next hop.

C. RR1 and RR2 need the same cluster ID to exchange routes learned from their clients.

D. RR2 adds its cluster ID when advertising routes from Client4 to Client3.

Correct Answer: BD


Question 5:

What information is stored in a VRF table for a BGP Layer 2 VPN? (Choose three.)

A. Layer 2 encapsulation

B. local site ID

C. remote interface of local CE device

D. logical interlace provisioned to local CE device

E. label-switched path

Correct Answer: ADE


Question 6:

Which two statements about wide and narrow metrics used in IS-IS are correct? (Choose two.)

A. Wide metrics are enabled with the wide-metrics-only parameter under protocols isis hierarchy.

B. Narrow metrics are enabled by default and use 8 bits in TLVs to send information.

C. Wide metrics are sent by default and use 24 bits in TLVs to send information.

D. Disabling narrow metrics results in external routes being leaked from L1 to L2 areas automatically.

Correct Answer: AB


Question 7:

R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs.

Referring to the exhibit, which configuration change will solve this issue?

A. Configure the join-load-balance parameter under PIM on R4.

B. Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.

C. Configure the group-range parameter to be the same on R2 and R3.

D. Configure the bootstrap priority on R2 to be the same as R3.

Correct Answer: A


Question 8:

Referring to the exhibit, which two statements are correct? (Choose two.)

A. R2 stops sending LSAs into the network.

B. The OSPF interface metrics on R2 are all set to 65535.

C. R1 will never forward transit traffic through R2.

D. Transit traffic from R1 to R4 will traverse R3.

Correct Answer: BD


Question 9:

Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?

A. 73

B. 20

C. 301

D. 310

Correct Answer: D


Question 10:

Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.

Winch two EVPN functions accomplish this task? (Choose two.)

A. multicast ingress replication

B. aliasing

C. split horizon

D. designated forwarder election

Correct Answer: CD


Question 11:

Which two types of LSAs have an area scope? (Choose two.)

A. Type 2

B. Type 5

C. Type 11

D. Type 7

Correct Answer: AC


Question 12:

Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.

In this scenario, which two configuration statements will solve this problem? (Choose two.)

A. set policy-options policy-statement ISP term REST then reject

B. set policy-options policy-statement ISP term ROUTES then reject

C. set policy-options as-path LOCAL-ROUTES “()”

D. set policy-options as-path LOCAL-ROUTES “(65310|65441) ”

Correct Answer: AC


Question 13:

A customer wants to reduce LSP flooding in their IS-IS network.

Which parameter should you change to accomplish this task?

A. [edit protocols isis] [email protected]# set spf-options rapid-runs 5

B. [edit protocols isis interface ] [email protected]# set csnp-interval 65535

C. [edit protocols isis interface ] [email protected]# set lsp-interval 1000

D. [edit protocols isis interface ] [email protected]# set mesh-group

Correct Answer: B


Question 14:

A network designer wants to ensure that traffic from R2 destined for 2001:db9:ffff:ff00::/62 always traverses the R2-R1 link if that link is available.

Referring to the exhibit, which configuration change will satisfy this requirement?

A. Option A

B. Option B

C. Option C

Correct Answer: A


Question 15:

R2 has IS-IS adjacencies with R3 and R4. You want to ensure that R2 has both a level 1 and level 2 adjacency to both R3 and R4, but R2 only has one adjacency with R4.

Referring to the exhibit, which configuration change will solve this issue?

A. Change the IS-IS area on R4 to match R2.

B. Remove the level 1 disable configuration from R4.

C. Remove the level 1 disable configuration from R2.

D. Change the IS-IS area on R2 to match R4.

Correct Answer: C


Visit our site to get more JN0-663 Q and As:https://www.pass4true.com/jn0-663.html (96 QAs Dumps)