Browsed by
Tag: NS0-180 vce

Latest Geekcert NS0-180 Exam NS0-180 Dumps 100% Free Download

Latest Geekcert NS0-180 Exam NS0-180 Dumps 100% Free Download

Don’t worry about how to get yourself well prepared your NCSIE Latest NS0-180 practice exam! Geekcert will work you out of your NCSIE Jan 14,2022 Hotest NS0-180 QAs exam with the latest updated Newest NS0-180 pdf NetApp Certified Storage Installation Engineer PDF and VCE dumps. Geekcert provides the latest real NetApp NCSIE Hotest NS0-180 free download exam preparation material, covering every aspect of Hotest NS0-180 pdf exam curriculum.

Geekcert – help you to get your NS0-180 certification more easily. save your time and money! high pass rate! Geekcert NS0-180 certification questions. Geekcert – clear all your NS0-180 certification exams with Geekcert study guide. 100% pass rate and money back guarantee. Geekcert – 100% real NS0-180 certification exam questions and answers. easily pass with a high score.

We Geekcert has our own expert team. They selected and published the latest NS0-180 preparation materials from NetApp Official Exam-Center: https://www.geekcert.com/ns0-180.html

The following are the NS0-180 free dumps. Go through and check the validity and accuracy of our NS0-180 dumps.If you need to check sample questions of the NS0-180 free dumps, go through the Q and As from NS0-180 dumps below.

Question 1:

You have just configured the customer\’s first SVM with a LIF IP 10.0.0.10/24. The customer\’s DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.

In this scenario what is the problem?

A. You need to have the DNS server on the same subnet as the LIF IP address.

B. You need to add a static gateway to the LIFs routing group.

C. You need to have the customer check the cable.

D. You need to add an IPspace and domain broadcast to the port.

Correct Answer: D

Explanation: A broadcast domain resides in an IPspace, and it contains a group of network ports, potentially from many nodes in the cluster, that belong to the same layer 2 network. The ports in the group are used in an SVM for data traffic. Reference: Clustered Data ONTAP 8.3, Network Management Guide, page 8


Question 2:

You have completed the installation of a 4-node cluster. The customer did not purchase management switches and will not allow your laptop on the network. In this situation, what are two valid procedures that will allow you to collect the Config Advisor output? (Choose two.)

A. Bring a switch that allows you to connect your laptop to all the switches and controllers.

B. Connect to a single controller in the cluster since it can run commands on every node.

C. Ask the customer to install and run Config Advisor on one of their PCs on the network.

D. Connect four USB serial cables to your laptop to allow you to connect to all four controllers.

Correct Answer: BC


Question 3:

A customer is installing a new system. The administrator needs to have the maximum available amount of data space. Which disk configuration should the administrator use?

A. RAID-DP

B. RAID4

C. Flash Pool

D. ADP

Correct Answer: D

Explanation: Advanced drive partitioning to increase usable capacity for entry systems, all-flash FAS, and Flash Pool.

Incorrect:

Not A: RAID-DP is useful for maximizing data protection, but it does not provide the maximum available data space. Not B: RAID4 is useful for optimizing writes, but it does not provide the maximum available data space.

Reference: http://community.netapp.com/t5/Tech-OnTap-Articles/Clustered-Data-ONTAP-8-3-A- Proven-Foundation-for-Hybrid-Cloud/ta-p/92703


Question 4:

You are asked to complete a 2-node installation of a FAS8060 cluster running clustered Data ONTAP 8.3. The hardware has been installed and the cluster has been configured. AutoSupport testing has not been successful because NetApp Support cannot see any messages, and the customer does not have any messages in their inbox.

Which two actions should be performed to test the functionality from the NetApp cluster? (Choose two.)

A. Verify that the network gateway responds to a ping request.

B. Verify that the mailhost responds to a ping request.

C. Verify that the domain controller responds to a ping request.

D. Verify that the cluster interconnect switches respond to a ping request.

Correct Answer: BD

B: Check that the mail host specified in the options is a host that the storage system can talk to, by running the following command on the storage system:

ping mailhost_name

mailhost_name is the name of the mail host specified in the AutoSupport options.

D: If the system cannot deliver AutoSupport messages over SMTP you should confirm basic network connectivity and DNS lookup:

Your network management LIF must be up for operational and administrative status.

You must be able to ping a functioning host on the same subnet from the cluster management LIF (not a LIF on any of the nodes).

You must be able to ping a functioning host outside the subnet from the cluster management LIF. You must be able to ping a functioning host outside the subnet from the cluster management LIF using the name of the host (not the IP

address).

Reference: How to troubleshoot AutoSupport delivery when using SMTP https://kb.netapp.com/index?page=contentandid=1014216andactp=LIST_POPULAR Reference: Troubleshooting AutoSupport message delivery over SMTP https://library.netapp.com/ecmdocs/ECMP1636037/html/GUID-9554CD61-AE6F-4FDA-86A6- 0E1480405873.html


Question 5:

You want to install a new clustered Data ONTAP 8.3 system. The customer wants to use open ports on interconnect switches from a different system with clustered Data ONTAP 8.2 because they are running out of space in their rack. What should be considered in this scenario?

A. Only one cluster per switch pair is qualified and supported.

B. You can use all free network ports for the cluster interconnect.

C. You can only use dedicated ports for the clustered interconnect.

D. A maximum of two clusters per switch pair are qualified and supported, but you should use trunked ports.

Correct Answer: C